Skip to main content

Hyperfibre Router Checklist: WAN Ports, Wi-Fi, ONT and Real Speeds

How to get the most from a multi-gigabit fibre connection

A Hyperfibre plan can deliver much more than a traditional gigabit connection, but the actual speed you experience depends on the entire network path. Before buying a new router or reporting a speed issue, check the fibre terminal, router, switches, cabling and test device.

1. Check both WAN and LAN ports

A router marketed as multi-gigabit might have a fast WAN interface and only 1 GbE LAN ports. For a single wired client to exceed one gigabit, the router WAN, LAN, any switch and the client adapter must all support the required link speed. A 10 GbE label on one port does not establish end-to-end capacity.

2. Check routing performance with security features enabled

Firewall state tracking, NAT, PPPoE where used, VPNs, traffic shaping and inspection can reduce throughput. Router datasheets sometimes quote peak hardware-forwarding numbers that do not reflect your configuration. Test real traffic with the features you expect to keep enabled.

3. Test wired before testing Wi-Fi

Wireless performance is affected by distance, interference, channel width, access-point placement and client support. Use a wired test device with a suitable multi-gigabit adapter and a reputable test endpoint before concluding that the fibre circuit is slow.

4. Check whether the ONT requires an upgrade

The optical network terminal and its active Ethernet handover need to be compatible with the selected service. A fibre network provider may need to supply a replacement ONT or arrange a change of port. Confirm those details with the ISP before buying equipment.

5. Preserve the features you actually use

Think about IPv6, VLANs, static IP, remote access, VPN throughput, port forwards, internal DNS and firewall policies. A suitable router should meet the real requirements of your network, not just advertise the highest wireless speed.

6. Size around multiple users

A fast broadband service can benefit a household or workplace with many simultaneous devices even where no individual device achieves the full plan speed. Distinguish the capacity shared by the site from the speed of one client.

Faro and bring-your-own-router broadband

Faro Internet by BTIT offers New Zealand fibre and Hyperfibre services with bring-your-own-router options. Check current service availability for your address, plan pricing, equipment requirements and any fibre-terminal changes before ordering.

Published by Faro Internet, a BTIT service. This guide does not endorse a specific router or guarantee any measured throughput.